IGAP-612H+

Industrial outdoor IEEE 802.11 a/b/g/n wireless access point with 10/100/1000Base-T(X) PoE P.D.

Overview
IGAP-610H+ is a reliable WLAN Access Point with 1 Ethernet Gigabit ports and IEEE 802.11 a/b/g/n wireless module.  It can be configured to operate in AP/Client/Repeater Mode. You are able to configure IGAP-610H+ by WEB interface via LAN port or WLAN interface. In addition, IGAP-610H+ also provides P.D. feature on Ethernet port which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IGAP-610H+ is one of the best communication solutions for wireless applications on the industrial network

Features

• High-Speed Air Connectivity: Dual Band in IEEE 802.11 a/b/g/n and b/g/n WLAN interface selectable and support up to 300Mbps link speed
  
• 1 Gigabit Ethernet port with 2KV isolation for PoE P.D.
• High throughput  with HT40 2x2 MIMO.
• High transmission power (27 dBm)
  
• Support X-Roaming < 100 ms
• Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X     Authentication supported
• Support AP/Repeater/AP-Client Mode
• Support Multiple SSID to 4 SSID with VLAN
  
• Secured Management by HTTPS
• Event Warning by Syslog, Email, SNMP Trap and Relay output
  
• Rigid IP-30 DIN Rail housing design

Interfaces

• 1x WIFI 802.11 a/b/g/n
• 1 x 10/100/1000Base-T(X) Port in RJ45

Antenna and connector: 2x 2.4GHz/5GHz Antenna, Reverse SMA F

Frequency Band
America/FCC : 2.412~2.462 GHz (11 channels)
Europe CE/ETSI : 2.412~2.472 GHz (13 channels)

Transmission Rate
IEEE802.11b : 1/ 2/ 5.5/ 11 Mbps
IEEE802.11a/g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps

IEEE 802.11n: up to 300Mb

Power
- Input Power: 12-48VDC on 4pin terminal block and from P.o.E
- Power Consumption (Typ.) 7 Watts

Dimension: 45(W)x 95(D)x 115(H)mm

Warranty 5 years