Rack Media Converter Fibra - Chasis

Sistemas Modulares para Conversores de Medios basados en Chasis. Son la solución de conversión multimedio de alta densidad. Opcionalmente pueden integrar una tarjeta de gestión SNMP.

El sistema modular basado en Chasis CTC FRM220 proporciona una solución de elevada densidad, seguridad y gestión.

Sistema modular de 20, 8 y 4 slots para media converter
Versiones Managed y UnManaged
Modulos Media Converter Hot Swap
Alimentadores redundantes Hot Swap
Relé de alarma para contactos limpios incorporado

Chasis Standalone 1 y 2 slots

Alimentaciones integradas y redundantes CA o CC

Chassis

Chasis
P/N	Descripción
FRM220-CH20 FRM220-AC FRM220-DC24 FRM220-DC48	Bastidor 20 slots para Modulos Media Converter; 2U, 19" Modulo alimentación chassis 90-264V, 200W Modulo alimentación chassis 18-36VDC, 200W Modulo alimentación chassis 36-75VDC, 200W
FRM220-CH08 FRM220-CH08-AC FRM220-CH08-DC24 FRM220-CH08-DC48	Bastidor 8 slots para Modulos Media Converter; 1U, 19" Modulo alimentación chassis 8 slot, FRM-CH08, 90-264V, 180W Modulo alimentación chassis 8 slot, FRM-CH08, 18-36VDC, 180W Modulo alimentación chassis 8 slot, FRM-CH08, 36-75VDC, 180W
FRM220-CH04A-AC	Chassis 4 slots para Modulos Media Converter; alimentador CA integrado (65W)
FRM220-CH04A-AA	Chassis 4 slots para Modulos Media Converter; alimentador dual CA integrado (65W)
FRM220-CH04A-DC	Chasis 4 slots para Modulos Media Converter; alimentador 18-75VDC integrado (50W)
FRM220-CH04A-DD	Chassis 4 slots para Modulos Media Converter; alimentador dual 18-75VDC integrado (50W)
FRM220-CH04A-AD	Chassis 4 slots; alimentador CA integrado (65W) + alimentador 18-75VDC integrado (50W)
FRM-CH02	Chassis 2 slots para Modulos Media Converter; alimentación CA (30W)
FRM-CH02M-AC	Chassis 2 slots alimentación CA (30W) con consola yventilador
FRM-CH02M-DC	Chassis 2 slots alimentación 18-75VDC (30W) con consola yventilador
FRM-CH01	Chassis 1 slot con fuente de alimentación 12W, fanless
FRM-CH01-AC	Chassis 1 slot; alimentación CA (12W), fanless
FRM220-NMC	Modulo de Gestión SNMP para Chassis FRM220; 1x RS232 + 1x eth 10/100

Modulos Transponder

Velocidades: 40G, 16G, 10G, 4G, 1G
	Modulos Transponder Funcionalidad 3R 3R (Re-amplification, Re-shaping and Reclocking) paraFibras multimodo o monomodo. Funcionalidades avanzadas - Link Pass-Through, Far-End Fault, Auto-MDIX e Loopback
P/N		Descripción
FRM220-40G-1Q4S	40G QSFP⁺ to 4x 10G SFP⁺ Transponder	The FRM220-40G-1Q4S is a 40G QSFP+ to 4x 10G SFP+ transponder that provides media conversion and distance extension for 40G over 10G links. The FRM220-40G-1Q4S is a two slot wide hot-swappable card with one QSFP+ slot for QSFP+ 40G transceiver and four SFP+ slots for SFP+ 10G transceivers.
FRM220-16G-3R	2 Channels 16Gbps 3R Multi-rate Transponder	The FRM220-16G-3R has 4 SFP+ slots that can be configured as a dual channel 16G 3R multi-rate transponder or in a 1-to-2 port protection mode. The device provides a flexible transmission of various protocols, like 1G/10G Ethernet, SDH STM16/STM64, OTU1/OTU1e/OTU2/OTU2e, FC 1/2/4/8/10/16G, ODU, OBSAI, CPRI..etc. Using SFP+ ports with dedicated CWDM or DWDM wavelengths, the 16G transponder supports a multi-rate functionality with data rates from 1Gbps up to 14Gbps.
FRM220-10G-SXX	10G Transponder (3R) with Optical Line Protection	The FRM220-10G-SXX is a 10G fiber to fiber 3R repeater and transponder, SFP+ to XFP (SX) or XFP to XFP (XX). 1+1 Automatic optical line Protection Switching is supported for the aggregate XFP fiber ports. Multiple protocol supported 10G Ethernet, STM-64, OC-192, G.709 OTU2, Fiber Channel (8 x FC)
FRM220-10G-SS	10G Transponder (3R)	The FRM220-10G-SS is a 10G fiber to fiber 3R repeater and transponder, SFP+ to SFP+. The transponders are protocol transparent, providing 3R (Reamplification, Re-shaping and Re-clocking). Multiple protocol supported 10G Ethernet, STM-64, OC-192, G.709 OTU2, Fiber Channel (8 x FC)
FRM220-4G-3S	4G Transponder (2R) with Optical Line Protection	The FRM220-4G-3S is a 2R 4G optical regeneration device, which consists of Re-amplification and Re-shaping, SFP to SFP. Multiple protocol supported at bit rates 28Mbps to 4.25Gbps (Fast Ethernet, Gigabit Ethernet, OC -3, OC -6, OC -12, STM-1, STM-4, STM-16, FC -1, FC -2, FC -4)
FRM220-1000DS	1G Transponder (2R)	The FRM220-1000DS is a fiber to fiber optical media converter and repeater that allows data rates up to 1Gbps, SFP to SFP. FRM220-1000DS supports 2R regeneration, which consists of re-amplification and reshaping. Compatible with fiber interfaces such as 100Mbps Fast Ethernet and 1000Mbps Gigabit Ethernet, STM-1, Fiber Channel 1, 2 and OC3

Modulos 10G

Velocidad: 10Gigabit
	Modulos Conversores de 10G BaseT a 10G BaseR; slot SFP+ o XFP, para fibras multimodo o monomodo Funcionalidades avanzadas - Link Pass-Through, Far-End Fault, Auto-MDIX e Loopback IEEE 802.1q VLAN pass through
P/N	Descripción
FRM220-GC-TS	10G Ethernet Media Converter 10G Base-T to 10G Base-R SFP+
FRM220-10GC-TX	10G Ethernet Media Converter 10G Base-T to 10G Base-R XFP

Modulos Gigabit

Velocidad: 10/100/1000 Mbps lado cobre y 1Gbps lado fibra
	Modulos Conversores de 10/100/1000 BaseT a 1000 BaseX; slot SFP, para fibras multimodo o monomodo Funcionalidades avanzadas - Link Pass-Through, Far-End Fault, Auto-MDIX e Loopback IEEE 802.1q VLAN pass through
P/N	Descripción
FRM220-1000TS	1000Base-T to 1000Base-X SFP Media Converter
FRM220-1000MS	10/1001000Base-T to 1000Base-X SFP Managed Media Converter
FRM220-1000M	10/1001000Base-T to 1000Base-X Managed Media Converter, connetori SC, ST o FC

Modulos Ethernet

Velocidad: 10/100 Mbps lado cobre y 100Mbps lado fibra
	Modulos Conversores de 10/100 BaseT a 100 BaseFX; conectores SC, ST y FC para fibras multimodo o monomodo Funcionalidades avanzadas - Link Pass-Through, Far-End Fault, Auto-MDIX e Loopback IEEE 802.1q VLAN pass through
P/N	Descripción
FRM220-10-100	10/100Base-TX to 100Base-FX Unmanaged Media Converter
FRM220-10/100i	10/100Base-TX to 100Base-FX In-Band Managed Converter

TDM / PDH / Voz


The TDM / PDH FXO / FXS Voice card is a POTS (Plain Old Telephone System) over fiber converter that required to implement an end to end system. FXO mode connects to a telephone line (PSTN) or PBX station line and has ability to detect ringing voltages and to act as a telephone. FXS mode is the reciprocal unit and has ability to act as PSTN and connects to a telephone device.
	P/N	Descripción
	FRM220-FXO/FXS	The FRM220-FXO/FXS is a POTS (Plain Old Telephone System) over fiber converter/extender. The POTS connection uses a standard RJ-11C modular connector for one copper pair connection. A pair of FRM220-FXO/FXS is required to implement an end to end system. FXO mode connects to a telephone line (PSTN) or PBX station line and has ability to detect ringing voltages and to act as a telephone. FXS mode is the reciprocal unit and has ability to act as PSTN and connects to a telephone device. When the FRM220-FXO/FXS card is placed in the FRM220 rack with NMC management, in-band management allows configuring and viewing the card and remote converter's status, type, version, fiber link status, on hook status and alarms. Both card and remote can be configured to enable or disable the port, reset the port and set the FXO or FXS mode. When configured in an FXS to FXS fashion, a private "hot line" or direct line is created. When placed in a single slot chassis and used standalone without management, the card may be configured by DIP switch.
	FRM220-FXO-4/FXS-4	FRM220-FXO-4/FXS-4 are 4 channel POTS (Plain Old Telephone System) over fiber converter/extender. The four POTS connection uses standard RJ-11C modular connectors for each copper pair connection. A pair of FRM220-FXO-4/FXS-4 is required to implement an end to end system. FXO type unit connects to a telephone line (PSTN) or PBX station line and has ability to detect ringing voltages and to act as a telephone. FXS type unit is the reciprocal unit and has ability to act as PSTN and connects to a telephone device. Two FXS cards may be connected back-to-back to provide a private "hot line".
	FRM220-DATA	The FRM220-DATA is a fiber modem for high-speed (up to 8.192Mbps) synchronous or low speed synchronous and asynchronous data transmissions (V.35, RS-232, RS-530, X.21 or RS-449) over fiber optical media. When the FRM220-DATA card is placed in the FRM220 rack with SNMP management, in-band management allows viewing the card and remote converter's status, type, version, fiber link status, data link status and alarms.
	FRM220-E1/T1	The fiber media transport for G.703 E1/T1 transmissions (FRM220-E1/T1) is designed for point-to-point use. The BNC model provides unbalanced 75 Ohm coaxial E1 connections while the RJ-45 model provides switchable balanced 120 Ohm E1 or 100 Ohm T1 connections over twisted pair wiring. When the FRM220-E1/T1 card is placed in the FRM220 rack with in-band management, the card status, type, version, fiber link status, E1 or T1 link status and alarms for both local card and remote unit can all be displayed.
	FRM220-FOM04	The single slot, single channel E1/T1 plus 100M Fast Ethernet fiber multiplexer card (FRM220-FOM04) is a dual slot, 4-channel E1/T1 plus 100M Fast Ethernet to 1+1 redundant fiber multiplexer card with an additional clear channel RS-232 and order wire.

ALIDEX