TGAP-620-M12

Industrial EN50155 IEEE 802.11 a/b/g/n wireless access point with 2x10/100/1000Base-T(X), M12 connector

Overview
ORing’s Transporter series access point is designed for industrial and rolling stock wireless applications, such as vehicle, and railway applications. TGAP-620-M12 is a reliable 802.11 a/b/g/n WLAN Access Point with 2 Ethernet 10/100/1000 ports. It can be configured to operate in AP/Client /Bridge /AP-Client Mode. TGAP-620-M12 provides dual Ethernet ports in switch mode, so that you can use Daisy Chain to reduce the usage of Ethernet switch ports. TGAP-620-M12 provides a dust-tight connection and reverses SMA-type connectors that can install any reverse SMA-type antennas to extend communication distance. It is specifically designed for the toughest industrial environments. You are able to configure TGAP-620-M12 by WEB interface via LAN port or WLAN interface.

Features

• EN50155-compliant wireless access point for rolling stock application
• High Speed Air Connectivity: WLAN interface support up to 300 Mbps link speed
• Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/WPA2/WPA2 - PSK(TKIP,AES)/802.1X Authentication
• Support X-Roaming < 60ms; Support wireless load balance
• Support Multiple-SSID to 4 SSID
• Dual Gigabit Ethernet ports support redundant mode (Recovery time < 10ms) and switch mode in M12 connector
• Secured Management by HTTPS
• Event Warning by Syslog, Email, SNMP Trap, and Relay output 
• Rigid IP-40 housing; wall mounting
• 1KV isolation for PoE P.D. port for TGAP-620+-M12

Interfaces

• 1 x WIFI 802.11 a/b/g/n
• 2 x 10/100/1000TX (M12) ports
• 2x DIDO (M12) ports
• 1x RS232 Console (M12) port
• 1x Relay Output (M12) port

Power
- Redundant Input Power: Dual DC inputs. 12-48VDC on 5-pin M23 /// PoE PD in model TGAP-620+-M12
- Power Consumption (Typ.) 8 Watts
- Overload Current Protection Present

Dimensions
125.6(W) x 65(D) x 196.1(H) mm

Environmental
Operating Temperature -25 to 70°C
Operating Humidity 5% to 95% Non-condensing

Warranty 5 years