SF63 Series

Industrial Serial to Fiber Media Converters

Overview
The SF63 Industrial Serial to Fiber Media Converter Series provide industrial conversion between 100BaseFX(SC or ST connector), RS-232, and RS-422/485; connection options include multi-mode SC/ST connector (2km), and single- mode SC/ST connector (30km). The SF63 Serial to Fiber Media Converter is designed for harsh industrial environments, and complies with FCC/CE standards.

Features

• Supports Multi-mode 2KM, Single-mode 30KM
• PTP and Ring mode for serial fiber ring communication
• Supports RS-485 120 ohm line terminator
• Supports RS-485 Data signals pull high/low resister
• Supports input voltage 9 ~ 48VDC
• -40 ~ 70°C Wide range of operating temperature for hazardous

Interfaces

• 1 x RS232 (DB)
  
• 1 x RS422/485 (TB)
  
• 1x multimode 850nm (2Km), SC / ST
  

Interfaces

• 1 x RS232 (DB)
  
• 1 x RS422/485 (TB)
  
• 1x singlemode 1310nm (30Km), SC / ST
  

Serial Interface

RS-232 Signals - TxD, RxD, GND( DCD, DTR, DSR internal short ; CTS, RTS internal short )
RS-422 Signals - TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w Signals - TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w Signals - Data+, Data-,GND
Baud rate 300bps to 921.6Kbps(RS-422/485)
Baud rate 300bps to 115.2Kbps(RS-232)

Power
- Redundant Input Power: Dual DC inputs. 9-48VDC on 3-pin terminal block
- Power Consumption (Typ.) 2,5 Watts
- Reverse Polarity Protection Present

Environmental
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing

Physical Characteristics
Dimensions (mm): 34.4 x 91.2 x 120
Enclosure: IP30

Warranty 5 years