INJ-101GT++ series

Industrial 1-port Gigabit High Power PoE++ Injector

Overview

The INJ-101GT++ PoE Injector series is not only an IEEE802.3at compliant device but also an advanced high power PoE injector. It is intelligent detection that provided 1-ports 10/100/1000Base-T (X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Therefore, only an IEEE 802.3at/802.3af compliant device can be powered with the INJ-101GT++ PoE Injector. Typically in Gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. The INJ-101GT++ PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3af/at PoE standards, and provide the DIP switch configurator for High power PoE management.

• Supports 1x10/100/1000 Base-T(X) for power and data Output
  
• Fully compliant with IEEE802.3at/802.3af
• Auto protection for Over Voltage Power Input and over current output
• Supports Power Output up to 60Watts
• Provided DIP switch configurator for PoE mode management
• Supports Power Input range 50Vdc - 57Vdc and 9-57Vdc
  
• IP30 Rugged Case Design
  
•  DIN Rail & Wall mounting enabled

Power
- Input Power: 50 ~ 57 VDC voltage power input on 4 pin terminal block

- Short Circuit Protection Present
- Overload Current Protection Present

- PoE Output Power: 60Watts per port

Power
- Input Power: 9~57VDC voltage power input on 4 pin terminal block

- Short Circuit Protection Present
- Overload Current Protection Present

- PoE Output Power: 60 Watts per port

Warranty 5 years