INJ-102GT series

Industrial 2-port Gigabit High Power PoE Injector

Overview

The INJ-102GT / INJ-102GT-24V PoE Injector is an advanced IEEE802.3at compliant device with Intelligent Detection, that provided 2-ports 10/100/1000Base-T(X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Because of this intelligent detection, only an IEEE 802.3at/802.3af compliant device can be powered with the INJ-102GT PoE Injector. Typically in gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. Because of its 12~57V insertion, the installer doesn’t need to worry about voltage drops caused by cable length. The INJ-102GT series PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/802.3af PoE standards.

• Supports 2x10/100/1000 Base-T(X) for power and data Output
• Fully compliant with IEEE802.3at/802.3af
• Auto protection for Over Voltage Power Input and over current output
• Supports Power Output up to 30Watts
• Supports Power Input range 50Vdc - 57Vdc and 12-57Vdc
• IP30 Rugged Case Design
•  DIN Rail & Wall mounting enabled

Power
- Input Power: 50 ~ 57 VDC voltage power input on 4 pin terminal block

- Short Circuit Protection Present
- Overload Current Protection Present

- PoE Output Power: 30Watts per port

Power
- Input Power: 12~57VDC voltage power input on 4 pin terminal block

- Short Circuit Protection Present
- Overload Current Protection Present

- PoE Output Power: 30 Watts per port

Warranty 5 years